28.6 Inch Bar Type LCD Module for Equipment Manufacturers
MODEL: DV286FBB‑NV0
Need customized solution?
Our engineering team is always ready to provide you with professional technical support and flexible customized services.
Understand light customization servicesBuilt by us. Configured for you.
HITULCD supplies LCD modules and display solutions directly from our manufacturing operation, giving OEMs, integrators and distributors direct access to engineering, customization and production.
Supply
Supplier Qualification
VerificationTechnical Specifications
| LCD PANEL PARAMETERS | HDMI/CONTROL BOARD SPECIFICATIONS | ||
|---|---|---|---|
| ITEM | DETAILS | ITEM | DETAILS |
| Model Number | DV286FBB‑NV0 | Input Interface | HDMI, VGA |
| Manufacturer | HITULCD | Power Input | DC 12V‑3A |
| Diagonal Size | 28.6" (32.0" Cut Panel, FOG Open‑Cell) | OSD KEYS | 5 KEYS (POWER, MENU, +, -, EXIT) |
| Resolution | 1920(RGB) × 560, 3.43:1 | OSD CONTROL | BRIGHTNESS, COLOR, CONTRAST, ROTATION, H/V POSITION |
| Panel Type | a‑Si TFT‑LCD, FOG Open‑Cell(Glass+COF IC, w/o Backlight) | ||
| Pixel Arrangement | RGB Vertical Stripe | ||
| Display Area(A.A) | 608.4(W)×203.7(H) mm | ||
| FOG Glass Outline | 708.4(W)×216.1(H) mm | ||
| LCM Overall Dimension(Est.) | 708.4(W)×216.1(H)×22~26(D) mm (with custom‑backlight) | ||
| Substrate Thickness | 0.485+0.485 mm | ||
| Panel Weight | TBD (FOG Glass); LCM Weight(Est.):2.3~2.7Kgs | ||
| Surface Treatment | Matte (Haze 1%), Hard Coating (3H) | ||
| Contrast Ratio | 1200:1 (Typ.)(Transmissive) | ||
| Transmittance | 5.1% (Typ.)(with polarizer) | ||
| Typical Brightness | 500 NITS | ||
| Response Time | 8 (Typ.)(G‑to‑G OD) ms | ||
| LCD Technology | ADS, Normally Black, Transmissive | ||
| Viewing Angle | 89°/89°/89°/89°(Typ.)(CR≥10) | ||
| Viewing Direction | Full Viewing Angle | ||
| Display Colors | 16.7M Colors,70% NTSC | ||
| Refresh Rate | 60Hz | ||
| Backlight Type | Not‑Included(FOG); Custom WLED 50K Hrs(Est., Require external‑driver) | ||
| Driver IC | COF Bonded, 6 source chips | ||
| Power Consumption | TBD (Depends on custom‑backlight assembly) | ||
| Signal Interface | 51 pins,0.5 mm LVDS(2 ch,8‑bit) | ||
| Supply Voltage | 12.0V (Typ.) | ||
| Touch Panel | Without Touch Function | ||
| Application Fields | Digital Signage (For custom‑LCM assembly only) | ||
| Operating Temperature | 0 ~ 50 °C | ||
| Storage Temperature | -20 ~ 60 °C | ||
HITULCD OEM/ODM — Display Integration Solutions for Global Equipment Manufacturers
Audience: Overseas Equipment OEMs, Systems Integrators, Engineering & Procurement TeamsPrepared by: HITULCD (Shenzhen Hantu Jiashi Technology Co., Ltd.)
1. Who We Are
HITULCD has spent over a decade (since 2014) designing and manufacturing display hardware for equipment builders around the world. We are not a trading company reselling panels — we operate our own bonding lines, cutting equipment, assembly floor, and reliability lab, which means your project goes through one factory, one engineering team, one accountable partner from concept to mass production.
| Export markets served | 38+ countries |
| Annual production capacity | 120,000+ units |
| Standard lead time | 2–3 weeks |
| Custom project lead time | 4–6 weeks |
| Warranty | 12 months, with engineering support |
| Certifications | ISO 9001:2015, ISO 14001:2015, IATF 16949:2016, CE, FCC, RoHS, UL, REACH, WEEE |
We support both OEM (re-branding, minor modification of existing designs) and full ODM (spec-driven development from a blank sheet), so you can choose the level of engineering involvement your project needs.
2. One Partner, Many Equipment Types
Most equipment OEMs don't need "a display" — they need a display integrated into a specific machine, with the right size, shape, brightness, interface and mechanical fit for that machine's enclosure. Because we manufacture across multiple display formats in-house, we can support a wide range of equipment categories without you having to manage multiple panel suppliers:
| Equipment / Industry | Typical Display Need | What We Provide |
|---|---|---|
| Retail & smart shelving | Shelf-edge bar displays, price/promo strips | Stretched bar displays, custom-cut panels, ultra-wide aspect ratios |
| Transportation (bus/rail/transit) | Passenger information displays, route signage | Rugged wide-temperature bar & open-frame displays, IP-rated options |
| Medical equipment | Embedded control panels, diagnostic device screens | Custom-size TFT modules, touch integration, long-lifecycle supply |
| Outdoor advertising & digital signage | Storefront windows, floor-to-ceiling displays | High-brightness (up to 3000 nits) direct-lit/edge-lit kits, weatherproofing |
| Industrial automation & HMI | Machine control panels, embedded terminals | 5.5"–27" industrial control kits, open-frame monitors, wide operating temp range |
| Gas station / fueling terminals | Payment terminals, price displays | Sunlight-readable high-brightness modules, outdoor-durable assemblies |
| Vending, kiosks & self-service equipment | Embedded touch displays | Open-frame monitors, projected-capacitive touch tuned for gloved use |
| Elevators & lift cabins | Ultra-wide information strips | Stretched bar displays sized to fit non-standard cabin openings |
| EV charging stations | Outdoor status/payment displays | High-brightness direct-lit modules, thermal management for 24/7 outdoor duty |
If your equipment doesn't fit neatly into one category above, that's normal — most of our OEM programs start from a non-standard enclosure or viewing window, not a catalog spec. That's what our custom cutting and mechanical integration capability exists for (Section 4).
3. Full-Scope OEM/ODM Service
We cover the complete path from design to mass production:
Design & Engineering
DFM (Design for Manufacturability) review against your enclosure/mechanical drawings
Custom panel sizing, including non-standard cut shapes and aspect ratios
Brightness, resolution, interface (HDMI / LVDS / eDP / VGA) and touch configuration
Custom AD/control boards supporting multiple signal inputs and automated dimming
Manufacturing
In-house COG/FOG bonding (JYD-I900E automatic COG line, micron-level alignment)
Precision glass cutting: fiber laser cutting (GH-1111, 7.5KW) for smooth, burr-free edges, and a dedicated OC glass cutting machine for open-cell precision cuts
Automated ACF lamination for stable, 100% circuit connection
Housing/mechanical assembly and full module integration
ISO 14644-1 certified cleanroom production
Quality & Reliability
11-stage visualized production process (cell feeding → vacuum bonding → ACF attachment → IC bonding → FOG electrical test → FPC bonding → ITO encapsulation → visual inspection)
High/low temperature and humidity test chambers for environmental simulation and aging tests
2D measuring instruments and microscope-level visual inspection
Branding, private-label packaging, and full technical documentation for your regulatory filings
Business Support
Private-label / logo branding
OEM re-branding of existing platforms, or full custom ODM development
Flexible MOQ by product line, sample units available before bulk commitment
Multiple payment/shipping terms (EXW/FOB/CIF; T/T, L/C, PayPal for samples, O/A for long-term partners)
4. Why Overseas Equipment Manufacturers Work With Us
We speak the language of Western industrial requirements. Our OEM/ODM programs across Europe and North America include compliance-ready documentation to help your CE, RoHS and FCC certification move faster, custom AD boards tuned for European smart-city and energy-efficiency requirements, and mechanical engineering support for both ultra-slim retail bezels and ruggedized transport-hub frames.
We are transparent before you commit. Shipping terms (EXW/FOB/CIF), MOQ, and payment protection are confirmed upfront — not discovered after you've sent a deposit. Our factory's business registration is publicly verifiable with Chinese government registries.
We support the full lifecycle, not just first samples. From a 20-unit pilot to volume programs inside our 120,000-unit annual capacity, the same engineering team stays engaged — which matters when your equipment platform runs for years and you need consistent panel supply and revision control.
5. Proven in the Field
A track record across multiple continents and equipment types:
Retail deployment: an integrator reported zero panel failures across 80 units of a 43-inch semi-outdoor bar display running six months into a transit-station pilot, despite significant daily temperature swings.
System integration: a customer noted our LVDS interface worked with their existing controller board without modification, with signal timing documentation delivered within 24 hours of request.
International project delivery: 55-inch 4K bar panels were sourced and delivered for a luxury elevator project in Dubai.
Volume outdoor programs: thousands of 50-inch and other high-brightness units deployed across Europe and North America, spanning EV charging stations and outdoor digital signage, rated for 50,000–100,000 hours of continuous 24/7 operation.
We can share additional case references, environmental test reports, and customer contacts (under NDA where required) once we understand your equipment category and target region.
6. Getting Started
To scope your OEM/ODM program, send us:
Equipment type and installation environment (indoor/outdoor, temperature range, IP rating needs)
Target display size or viewing-window dimensions (drawing if available)
Brightness, resolution, and interface requirements
Touch requirement (yes/no, glove use, environment)
Target volume and program timeline
Certification requirements for your target market (CE / FCC / UL / RoHS, etc.)
Our engineering team will respond with a feasibility assessment, recommended product platform, and indicative sample lead time — typically within 24 hours of receiving your inquiry.
Contact: chenhua@hitulcd.com | +86 18682328732 | Request a Quote
28.6" Bar-Type LCD Module (Cut-Panel / FOG Open-Cell) — Technical & Sourcing Brief
Model: DV286FBB-NV0For: Equipment OEMs, Systems Integrators, Overseas Engineering & Procurement TeamsPrepared by: HITULCD (Shenzhen Hantu Jiashi Technology Co., Ltd.)
1. Product Overview
This module is a 32.0" open-cell TFT panel precision-cut down to a 28.6" ultra-wide bar format (1920 × 560, 3.43:1 aspect ratio), supplied as FOG (Glass + COF IC, without backlight) for customers integrating their own backlight/mechanical assembly. It is designed for embedded, digital-signage-style bar displays in kiosks, vending, retail shelving, and equipment front panels.
Because this is a cut-panel product, the questions below — the ones we hear most often from European and North American engineering and procurement teams evaluating custom-cut TFT modules — are addressed directly against this part number.
2. Process Feasibility & Cutting Method
| Question | Our Answer |
|---|---|
| Cutting method | Standard cuts on this outline use mechanical wheel scribe-and-break, which is cost-effective and proven for straight-edge bar formats at this size. For tighter tolerance windows, edges closer to active circuitry, or shapes with corner radii, we switch to ultrafast (picosecond) laser cutting to avoid mechanical stress and micro-chipping. The recommended method is confirmed per drawing during DFM review, not assumed up front. |
| Dimensional tolerance | FOG glass outline: 708.4(W) × 216.1(H) mm; Active Area: 608.4(W) × 203.7(H) mm. Standard cut tolerance is confirmed against the customer's target outline during feasibility review — tighter tolerances are achievable via laser cutting. |
| Trace / circuit clearance (Gate/Source, TFT array) | Every custom-cut request goes through a CAD overlay check against the original mother-glass layout to confirm the new cut line does not intersect Gate/Source routing, the COF bonding area, or the active TFT array. This is standard practice, not an added service. |
| What we need from you to confirm feasibility | To run this check, we ask for: (1) target outline drawing (DXF/DWG) with datum reference, (2) required active area and its position relative to the outline, (3) tolerance class, and (4) mounting/bezel interface if relevant. We return a marked-up feasibility drawing before quoting. |
| Edge finish / micro-crack control | Post-cut edges are ground and polished to a controlled flatness spec, with micro-crack inspection under magnification as part of outgoing QC. Edge chipping and crack propagation limits are defined per project based on cutting method and glass thickness (substrate: 0.485 + 0.485 mm). |
3. Reliability & Edge-Sealing Assurance
| Question | Our Answer |
|---|---|
| Sealing process after cutting | Cut edges receive a secondary sealing process (UV-cure edge dispensing) to close the exposed glass/liquid-crystal boundary and block moisture ingress. Dispensing path and dot/line pattern are adjusted to the specific cut geometry. |
| Reliability testing | Cut-and-sealed modules can be qualified against standard industrial-grade reliability protocols, including double-85 (85°C/85%RH) high-temp/high-humidity soak, thermal shock cycling, and structural drop testing. We can share representative test data/reports from comparable past cutting projects under NDA. |
| Optical performance at the cut edge | Because sealing and cutting are controlled per the CAD clearance check above, edge-zone light leakage and color shift (Mura) are inspected as part of final QC. Risk is highest when a cut line runs close to the active area boundary — which is exactly what the pre-quote feasibility drawing is designed to catch. |
| Operating conditions | Rated operating temperature 0–50°C, storage -20–60°C, panel type a-Si TFT-LCD (ADS, normally black, transmissive), 500 nits typical brightness. |
4. Cost, Yield & Lead Time
| Question | Our Answer |
|---|---|
| NRE / tooling cost | NRE for a custom cut profile depends on cut complexity (straight edge vs. radiused corners), tolerance class, and whether new fixtures are required. A firm NRE quote is issued after the feasibility drawing review in Section 2. |
| First sample lead time | Typical first-article sample run (~20 pcs) is quoted case-by-case once cutting method and sealing process are confirmed; this sits alongside our standard 2–3 week lead time for non-custom builds, with custom/cut projects generally running longer to allow for tooling and QC cycles. |
| Expected mass-production yield | Yield for cut-panel programs is tracked per project based on cut geometry, edge length, and proximity to the active area — we share historical yield data for comparable geometries once your drawing is reviewed, rather than quoting a blanket number. |
| MOQ | Standard-spec MOQ is 1 unit; custom cutting, brightness, or bezel configurations carry a separate MOQ, confirmed at quotation stage. |
5. Supplier Qualification Snapshot
Certifications: CE / FCC / RoHS standard; UL / CCC / EAC available on request
Compliance: RoHS & REACH compliant, documentation available on request
Production capacity: 12,000+ units/month; supports prototype, small-batch, and volume programs
Warranty: 12 months, with engineering support
Shipping terms: EXW / FOB / CIF
Payment: T/T, L/C (volume), PayPal (samples), O/A (long-term partners)
Legal entity: Shenzhen Hantu Jiashi Technology Co., Ltd., established 2014, publicly verifiable business registration (USCC: 91440300306068446B)
6. Next Step for Feasibility Review
To move directly into the cutting feasibility check, please send:
Target outline drawing (DXF/DWG) with datum points
Required active display area and its position on the outline
Tolerance requirement (if known)
Intended reliability test standard (consumer vs. industrial grade)
Target volume and program timeline
We'll return a marked-up feasibility drawing, recommended cutting method, and indicative NRE/sample lead time based on the above.
Know The Terms Before You Inquire.
|
01 — Shipping Terms
Incoterms Available
EXW
Ex Works — pick up from our factory
FOB
Free On Board — most common for ocean freight
CIF
Cost, Insurance & Freight — to your port
|
02 — Order Minimum
MOQ: 1 Units
Applies to standard specs. Custom brightness, cutting or bezel may adjust MOQ, confirmed at quotation. Sample units available before bulk order
|
03 — Payment Protection
Multiple Secured Methods
|
A Real Factory. Publicly Verifiable.
|
Legal Company Name
Shenzhen Hantu Jiashi Technology Co., Ltd.
|
Unified Social Credit Code
91440300306068446B
|
|
Legal Representative
YUN CHEN
|
Registered Capital
RMB 2,000,000
|
|
Established
May 23, 2014 (11+ years operation)
|
Business Status
● Active / In Operation
|
|
Registered Factory Address
Building B, Gangshen Innovation Park, Huaning Road, Dalang Sub-district, Longhua District, Shenzhen, Guangdong, China
|
|
Contact HITULCD
We'll respond via email within 24 hours. If you'd like to discuss details over WhatsApp or a call, please leave a preferred time and contact method in your message — we will never call you unannounced.
Related solutions
This product is suitable for the following industry application scenarios
Floor Information Bar LCD Display Solution
Ultra-wide, high-brightness stretched bar LCD disp...
view
Convenience Store Bar LCD Display Solution
Ultra-slim, high-brightness stretched bar LCD disp...
view
Bus Passenger Information Stretched Bar Display Solution
A rugged, ultra-wide stretched bar display solutio...
viewRelated Products
You may also be interested in the following products
