28.6" Bar-Type LCD Module for Embedded Display Applications (LD290EJE-FPA1)

Technical & Sourcing Brief for OEM Integrators, Procurement Managers & Project Engineers

HITULCD's LD290EJE-FPA1 is a native bar-format TFT LCD panel — designed and manufactured directly at 28.6" / 3.56:1 aspect ratio, not produced by cutting down a standard-ratio panel. It's built for embedded integration into kiosks, self-checkout terminals, digital signage and control panels where a slim depth (15.4mm) and in-cell touch are required.

Because several of the questions our overseas partners typically raise about this product category are specific to cut-panel manufacturing, we've structured this brief to first clarify what does and doesn't apply to this model, then walk through reliability, cost and lead-time the way we would in an actual RFQ response.

1. Manufacturing Process & Feasibility — Why Most Cutting Questions Don't Apply Here

If you've evaluated cut-panel bar displays before, you've likely already prepared questions about cutting method, Gate/Source trace clearance, and edge micro-crack control. This specific model sidesteps that category of risk entirely, because it is not produced by cutting a source panel:

• No secondary cutting process. The panel is manufactured at its final 28.6" bar dimension from the outset — there is no scribe-and-break or laser-cut edge, and therefore no cut-line-to-circuit clearance review required.

• No post-cut glass edge. The panel edge is the original factory edge, not a processed cut edge, which removes the cutting-related failure modes (micro-cracks, edge chipping, sealing integrity) from your risk assessment entirely.

• When you'd still need a cut-panel model instead. If your target dimension falls outside our native bar-panel size range, or you need a specific aspect ratio/resolution combination we don't produce natively, our cut-panel platform (e.g. the 32"-sourced 28.6" cut model, P286IVN03.0) remains available — happy to compare both against your exact spec if you're not yet sure which fits.

What we still need from you for feasibility confirmation:

• Target mounting cutout dimensions and depth clearance (15.4mm module depth)

• Touch requirement — this model ships with in-cell touch (USB, 4-wire) as standard

• Interface confirmation (HDMI/VGA input to the control board, LVDS to the panel)

• Environmental range for your installation site (see Section 2)

2. Reliability & Build Quality

Edge and surface treatment. Surface is matte with 4H hard coating — harder than the cut-panel platform's 3H rating, which matters for high-touch embedded environments (kiosks, self-service terminals) where the surface sees repeated contact.

Touch integration. In-cell touch is built into the panel stack itself rather than added as a bonded overlay, which removes a lamination interface that would otherwise be a separate reliability variable (bubble, delamination risk) to track.

Reliability testing. As a non-cut, factory-native panel, this model qualifies under our standard consumer/industrial-grade reliability protocols without the additional cut-edge sealing validation step:

• Operating temperature 0°C ~ 50°C / storage -20°C ~ 60°C — please flag if your installation site falls outside this range, as it affects which platform (this model vs. our wider-temperature cut-panel or industrial lines) is the right fit

• Standard environmental cycling (temperature/humidity, thermal shock) and structural drop testing benchmark data available on request, referenced against comparable embedded-display programs

Optical performance. IPS panel technology with full viewing angle (89°/89°/89°/89°, CR≥10) and 72% NTSC color gamut — since there's no cut edge, there's no cut-edge-adjacent Mura, light leakage or color shift risk to evaluate; standard panel-wide optical inspection applies.

3. Cost, Yield & Lead Time

Because this model doesn't carry a cutting/sealing process step, its cost and lead-time profile is simpler than a cut-panel program:

4. Technical Specifications

5. Supplier Qualification

• Certifications: CE / FCC / RoHS as standard; UL / CCC / EAC available on request

• Compliance: RoHS and REACH compliant; documentation available on request

• Legal entity: Shenzhen Hantu Jiashi Technology Co., Ltd. (established 2014, active status, registered capital RMB 2,000,000)

• Shipping terms: EXW / FOB / CIF

• Payment terms: T/T, L/C, PayPal (samples), O/A for long-term partners

6. Next Step

To confirm fit for your project, please send:

1. Mounting cutout dimensions and available depth clearance

2. Touch requirement and interface (HDMI/VGA/USB)

3. Installation environment (indoor/embedded, expected temperature range)

4. Target volume and timeline

If your target dimension or aspect ratio falls outside this native bar-panel platform, we'll flag it and route you to our cut-panel option with the corresponding feasibility review instead of forcing a fit.

Contact: chenhua@hitulcd.com | +86 186 8232 8732