58.4 Inch Bar Display Module for Commercial Display Manufacturers
MODEL: DV585XTB‑NV0
Need customized solution?
Our engineering team is always ready to provide you with professional technical support and flexible customized services.
Understand light customization servicesBuilt by us. Configured for you.
HITULCD supplies LCD modules and display solutions directly from our manufacturing operation, giving OEMs, integrators and distributors direct access to engineering, customization and production.
Supply
Supplier Qualification
VerificationTechnical Specifications
| LCD PANEL PARAMETERS | HDMI/CONTROL BOARD SPECIFICATIONS | ||
|---|---|---|---|
| ITEM | DETAILS | ITEM | DETAILS |
| Model Number | DV585XTB‑NV0 (FOB Open‑Cell, Without Backlight) | Input Interface | Require special CEDS driver board (NOT LVDS / V‑by‑One) |
| Manufacturer | HITULCD | Power Input | DC 12V‑5A |
| Diagonal Size | 58.4" FOB Open‑Cell Native Stretched Bar | OSD KEYS | N/A(Depend on driver board) |
| Resolution | 3840(RGB) × 1080 DFHD, 3.56:1 | OSD CONTROL | N/A(Depend on driver board) |
| Panel Type | a‑Si TFT‑LCD, FOB Open‑Cell(Glass+COF IC, w/o Backlight) | ||
| Pixel Arrangement | RGB Vertical Stripe | ||
| Display Area(A.A) | 1413.48(W)×386.76(H) mm | ||
| FOB Glass Outline | 1440.48(W)×416.76(H)×1.34(D) mm | ||
| LCM Overall Dimension(Est.) | 1440.48(W)×416.76(H)×24~30(D) mm (with custom‑backlight) | ||
| Substrate Thickness | 0.50+0.50 mm | ||
| Panel Weight | 1.72Kgs (Typ.,FOB Glass); LCM Weight(Est.):4.2~4.8Kgs | ||
| Surface Treatment | Matte (Haze 1%), Hard Coating (3H) | ||
| Contrast Ratio | 1200:1 (Typ.)(Transmissive) | ||
| Transmittance | 5.1% (Typ.)(with polarizer) | ||
| Typical Brightness | 1000 NITS | ||
| Response Time | 8 (Typ.)(G‑to‑G) ms | ||
| LCD Technology | ADS, Normally Black, Transmissive | ||
| Viewing Angle | 89°/89°/89°/89°(Typ.)(CR≥10) | ||
| Viewing Direction | Full Viewing Angle | ||
| Display Colors | 1.07B Colors,96% sRGB | ||
| Refresh Rate | 60Hz | ||
| Backlight Type | Not‑Included(FOB); Custom WLED 50K Hrs(Est.,Require external‑driver) | ||
| Driver IC | COF Bonded, 12 source chips | ||
| Power Consumption | TBD (Depends on custom‑backlight assembly) | ||
| Signal Interface | 51 pins,0.5 mm CEDS proprietary interface (NOT LVDS / V‑by‑One) | ||
| Supply Voltage | 12.0V (Typ.) | ||
| Touch Panel | Without Touch Function | ||
| Application Fields | Digital Signage (For custom‑LCM assembly only) | ||
| Operating Temperature | 0 ~ 50 °C | ||
| Storage Temperature | -20 ~ 60 °C | ||
OEM / ODM Services — 58.4" Bar-Type Stretched Display Module
Why Overseas Brands & System Integrators Choose Custom Cutting Partners
Prepared for: Overseas Display Brands / System Integrators / Digital Signage Project Owners
1. Market Context
Bar-type (stretched) displays are one of the fastest-growing segments in commercial digital signage — driven by demand for non-standard aspect ratios in retail shelf-edge, transit signage, elevator media, and architectural applications where a standard 16:9 panel simply doesn't fit the space. Because these sizes don't exist as native panel products, every bar-type display on the market today is the result of a custom cutting + OEM/ODM relationship between a brand and a manufacturing partner.
This creates two distinct sourcing needs for overseas customers:
Brands and integrators need a partner who can turn a spec (size, aspect ratio, brightness, interface) into a manufacturable, reliable product — without them having to manage panel sourcing, cutting, sealing, and reliability validation in-house.
Distributors and resellers need private-label options on proven cut sizes (like 58.4") to build a catalog under their own brand, without R&D investment.
Our OEM/ODM program is built to serve both.
2. What We Offer
OEM (Your Brand, Our Manufacturing)
Private-label branding on housing, packaging, and OSD/boot logo
Customer-specified interface board, connector, or controller (Android board, media player, touch overlay, etc.)
Custom bezel color, mounting bracket, or enclosure to match your product line
Your part numbering and documentation format
ODM (From Spec to Finished Product)
Full design-in support starting from your target dimensions, aspect ratio, or installation constraint
Panel/donor sourcing, cutting method selection, and feasibility engineering (see our technical process document)
Reliability testing to your required grade (consumer/industrial) with test reports for your compliance file
Structural design of chassis, thermal management, and cable routing for your specific enclosure
Option to co-develop new cut sizes not currently in our standard catalog
3. Why This Matters for Bar-Type Displays Specifically
Unlike standard-size panels, bar-type displays require the manufacturer to control the entire chain — donor panel selection, cut-line engineering, edge sealing, and reliability validation — before a "standard product" even exists. This means OEM/ODM isn't an add-on service for this category; it's effectively how the product gets made. Choosing a partner with in-house cutting, sealing, and testing capability (rather than one that subcontracts the cutting step) directly affects:
Consistency across production batches (cut tolerance, edge Mura control)
Speed from spec to sample (no third-party cutting queue)
IP protection — your target dimensions and cut design aren't shared with an external cutting vendor
Accountability for reliability test results, since the same team that cuts the panel also validates it
4. Typical OEM/ODM Engagement Flow
| Stage | What Happens |
|---|---|
| 1. Spec intake | You share target size, aspect ratio, interface, brightness, environment, and volume |
| 2. Feasibility review | We confirm cutting method, tolerance, and flag any circuit/trace conflicts |
| 3. Quotation | NRE, sample lead time, and unit pricing at your target MOQ |
| 4. Sample build | First samples (typ. ~20 pcs) built and reliability-tested |
| 5. Sample approval | You validate against your own QC/reliability criteria |
| 6. Mass production | Production ramp with agreed yield and delivery schedule |
5. Minimum Requirements to Start an OEM/ODM Discussion
Target size/aspect ratio, or the space constraint you're designing around
Brightness, viewing environment (indoor/outdoor), and operating temperature range
Interface/controller requirements (standalone Android, external PC, touch, etc.)
Branding requirements (logo, housing color, packaging)
Estimated sample and annual production volume
We work with both brands building a new custom size and distributors looking to private-label our standard 58.4" cut. Share your requirement and we'll advise the most efficient path — standard cut + private label, or full custom ODM.
58.4" Bar-Type Stretched Display Module
Technical & Sourcing Guide for Commercial Display Manufacturers
Prepared for: Overseas Engineers / Procurement Managers / Project Leads
1. Product Overview
The 58.4" bar-type (stretched) display module is produced by precision-cutting a standard 58"/65" UHD open-cell LCD panel into an ultra-wide aspect ratio format, ideal for digital signage, transit information boards, shelf-edge advertising, and architectural media walls.
| Item | Reference Spec |
|---|---|
| Active Size | 58.4" (diagonal) |
| Donor Panel | 58"/65" UHD (3840×2160) open cell |
| Cutting Ratio | Configurable — 1/2, 1/3, 1/4 cut available on request |
| Aspect Ratio | Custom (e.g., 16:4.5, 16:6, 16:9 stretched variants) |
| Interface | LVDS / eDP (per original panel spec) |
| Brightness | Per donor panel baseline; HB options available |
| Application | Digital signage, transit displays, retail shelf edge, control rooms |
Note: Exact resolution, luminance, and dimensional specs are confirmed per project based on the donor panel model selected — please share your target application and installation constraints for a tailored spec sheet.
2. Cutting Process & Feasibility Assessment
2.1 Cutting Method
We offer two proven cutting approaches, selected based on cut-line location and customer tolerance requirements:
Mechanical wheel (scribe-and-break) cutting — cost-effective, suitable for straight cuts along non-active glass margins with standard tolerance (±0.2–0.3mm).
Ultra-fast laser cutting (picosecond/femtosecond) — preferred for cuts closer to the active display area or where micro-crack control and edge strength are critical (tolerance can be held to ±0.1mm or tighter).
Our engineering team will recommend the appropriate method after reviewing your target cut-line position relative to the panel's active area.
2.2 Circuit & Trace Avoidance
Before any cutting feasibility is confirmed, we require the following from the customer (or will extract from the donor panel if sourced by us):
Panel model number and full datasheet
Gate/Source driver IC and COF/COG bonding area layout
TFT array boundary and active area (AA) coordinates
Target cut dimensions and required tolerance
Our team cross-checks the proposed cut line against Gate/Source trace routing and the TFT array to confirm no interference with active circuitry, and will flag any conflict before quotation.
2.3 Edge Treatment Standard
Post-cut edges are inspected under microscope against the following baseline criteria (adjustable per customer's reliability requirements):
Edge flatness: controlled within standard chamfer/grinding tolerance
Micro-crack depth: limited to a defined maximum (verified via edge inspection sampling)
Edge finishing: fine grinding + polishing to remove chipping and stress points prior to sealing
3. Reliability & Edge Sealing
3.1 Sealing Process
To prevent liquid crystal leakage and moisture ingress at the cut edge, we apply a secondary sealing process — typically UV-cure dispensed sealant along the cut edge, sometimes combined with a secondary moisture-barrier coating depending on the application environment (indoor vs. outdoor/high-humidity).
3.2 Reliability Testing
Cut modules are validated through standard reliability protocols, with test level (consumer-grade or industrial-grade) selected based on end-use application:
| Test | Typical Condition |
|---|---|
| High-temp / high-humidity (double 85) | 85°C / 85% RH, 240–500 hrs (per grade) |
| High/low temp storage | -20°C to 60°C cycling |
| Thermal shock | -20°C ↔ 60°C, multiple cycles |
| Structural drop test | Per packaging/module spec |
We can share test reports and benchmark data from comparable cutting projects upon NDA/RFQ engagement.
3.3 Optical Performance After Sealing
Edge-adjacent Mura risk (light leakage, color shift near the cut line) is controlled through the combination of cutting precision + sealant selection + backlight/optical film trimming process. Edge inspection is part of standard outgoing QC, with acceptance criteria defined jointly with the customer during sample approval.
4. Cost, Yield & Lead Time
| Item | Typical Range* |
|---|---|
| NRE (tooling/engineering setup) | Quoted per project, based on cut complexity and panel sourcing |
| Sample lead time (≈20 pcs) | Confirmed after feasibility review — generally within a few weeks of design freeze |
| Expected mass-production yield | Dependent on cut-line complexity and tolerance requirements; shared based on comparable project history |
| MOQ (mass production) | Project-dependent, tied to donor panel sourcing volume |
*Exact figures are provided after technical review of your target spec, cut position, and volume forecast — please submit your drawing/spec request via RFQ for a formal quotation.
5. What We Need From You to Start
To issue a feasibility assessment and formal quotation, please provide:
Target module dimensions, aspect ratio, and tolerance requirements
Donor panel model (if specified) or target resolution/brightness
Application environment (indoor/outdoor, temperature range, expected lifespan)
Reliability test level required (consumer / industrial)
Estimated annual volume and sample quantity needed
This document is a general technical capability overview. Final specifications, test data, and pricing are confirmed per project after technical review.
Know The Terms Before You Inquire.
|
01 — Shipping Terms
Incoterms Available
EXW
Ex Works — pick up from our factory
FOB
Free On Board — most common for ocean freight
CIF
Cost, Insurance & Freight — to your port
|
02 — Order Minimum
MOQ: 1 Units
Applies to standard specs. Custom brightness, cutting or bezel may adjust MOQ, confirmed at quotation. Sample units available before bulk order
|
03 — Payment Protection
Multiple Secured Methods
|
A Real Factory. Publicly Verifiable.
|
Legal Company Name
Shenzhen Hantu Jiashi Technology Co., Ltd.
|
Unified Social Credit Code
91440300306068446B
|
|
Legal Representative
YUN CHEN
|
Registered Capital
RMB 2,000,000
|
|
Established
May 23, 2014 (11+ years operation)
|
Business Status
● Active / In Operation
|
|
Registered Factory Address
Building B, Gangshen Innovation Park, Huaning Road, Dalang Sub-district, Longhua District, Shenzhen, Guangdong, China
|
|
Contact HITULCD
We'll respond via email within 24 hours. If you'd like to discuss details over WhatsApp or a call, please leave a preferred time and contact method in your message — we will never call you unannounced.
Related solutions
This product is suitable for the following industry application scenarios
Floor Information Bar LCD Display Solution
Ultra-wide, high-brightness stretched bar LCD disp...
view
Convenience Store Bar LCD Display Solution
Ultra-slim, high-brightness stretched bar LCD disp...
view
Bus Passenger Information Stretched Bar Display Solution
A rugged, ultra-wide stretched bar display solutio...
viewRelated Products
You may also be interested in the following products
