36.6" Stretched TFT LCD Module (DV366FBM-N10)

Technical & Commercial Brief for OEM / ODM Buyers, Engineers and Project Managers

1. Product Overview

The DV366FBM-N10 is a 36.6-inch ultra-wide stretched bar TFT-LCD module, engineered as a native stretched panel (not a mechanically or laser-cut standard panel), purpose-built for integration into digital signage, self-checkout systems, vehicle information displays, and industrial control equipment.

Because this module is produced as a purpose-built stretched panel rather than a cut-down standard panel, buyers avoid several of the technical risks associated with panel-cutting projects. That said, many of our OEM clients also request custom-cut bar displays from standard-size TFT panels for legacy retrofit or space-constrained installations. The sections below answer the questions we most frequently receive from overseas engineering and procurement teams on both native stretched panels and custom-cut panel programs.

2. Engineering Feasibility & Process (For Custom-Cut / Modified Panel Programs)

Q: What cutting method do you recommend, and how do you decide?For panel modification projects, we evaluate case-by-case between:

• Mechanical wheel scribing — lower cost, suitable for straight-line cuts on non-critical edges, standard tolerance ±0.3–0.5mm.

• Ultra-fast (picosecond/femtosecond) laser cutting — recommended for cuts near active display area, curved profiles, or where micro-crack control is critical; tolerance can be held to ±0.1mm.

The final recommendation depends on cut-line location, glass thickness, and your target tolerance — confirmed during technical review.

Q: Will the cut line interfere with Gate/Source traces or the TFT array?Before quotation, our engineering team requires the following to confirm feasibility:

• Original panel datasheet / drawing (including Gate/Source driver IC and COF/COG bonding area location)

• Target cut-line dimensions and tolerance requirements

• Sample panel (physical or via panel model number) for internal trace-map verification

We will not proceed with a cutting proposal until we've confirmed the cut line clears active circuitry, or we've proposed a re-routed/re-bonded solution where clearance isn't possible.

Q: What are your edge-flatness and micro-crack control standards?Post-cut edges are inspected under microscope against internal AQL criteria for chip-out, edge flatness, and micro-crack propagation risk before proceeding to sealing.

3. Reliability & Edge-Sealing Assurance

Q: How do you prevent liquid crystal leakage and moisture ingress after cutting?Cut edges undergo a secondary sealing process — typically UV-cure edge sealant dispensing, applied under controlled dispensing pressure and cure time to restore the original panel's liquid-crystal containment and moisture barrier.

Q: Can cut/modified modules pass standard reliability testing?Depending on your end-use (consumer vs. industrial), modules can be qualified against:

• Double 85 test (85°C / 85% RH) — high-temperature, high-humidity endurance

• High/low temperature cycling — thermal shock resistance

• Structural drop test — per your application's transport/handling profile

We share environmental test benchmark data from comparable cutting projects during the technical evaluation stage — please request this alongside your RFQ.

Q: Does sealing introduce light leakage or Mura near the cut edge?Edge-zone optical performance (light leakage, color shift) is checked post-sealing as part of standard outgoing inspection. Any deviation is addressed by adjusting sealant dispensing parameters before batch production sign-off.

4. Cost, Yield & Program Timeline

*Exact figures are confirmed once we've reviewed your drawings and tolerance requirements — figures above reflect typical ranges from comparable OEM programs.

5. Why Source This From HITULCD

• Manufacturer-direct supply — Shenzhen Hantu Jiashi Technology Co., Ltd. (est. 2014, Unified Social Credit Code 91440300306068446B), in-house production and testing, no trading-company markup.

• Production capacity: 12,000+ units/month; supports prototype, small-batch, and volume programs.

• Compliance: CE / FCC / RoHS standard; UL / CCC / EAC available on request; RoHS & REACH documentation available.

• Warranty: 12 months with direct engineering support.

• Trade terms: EXW / FOB / CIF; T/T, L/C, PayPal (samples), O/A for established partners.

6. Next Steps for Your RFQ

To receive a technical feasibility assessment and formal quotation, please provide:

1. Target display size, resolution, and aspect ratio

2. Mechanical drawing or DXF of the housing/cutout

3. Original panel datasheet (if requesting a custom-cut panel)

4. Target environmental test standard (consumer / industrial) and application (indoor/outdoor, vehicle, etc.)

5. Estimated annual volume and target unit cost (if available)

Contact: chenhua@hitulcd.com | +86 186 8232 8732 | Submit Inquiry