43 Inch Custom Stretched LCD Panel for OEM and ODM Equipment Projects
MODEL: HT430HBM
Need customized solution?
Our engineering team is always ready to provide you with professional technical support and flexible customized services.
Understand light customization servicesBuilt by us. Configured for you.
HITULCD supplies LCD modules and display solutions directly from our manufacturing operation, giving OEMs, integrators and distributors direct access to engineering, customization and production.
Supply
Supplier Qualification
VerificationTechnical Specifications
| LCD PANEL PARAMETERS | HDMI/CONTROL BOARD SPECIFICATIONS | ||
|---|---|---|---|
| ITEM | DETAILS | ITEM | DETAILS |
| Model Number | HT430HBM | Input Interface | HDMI, VGA |
| Diagonal Size | 43.0" | Power Input | DC 12V‑5A |
| Resolution | 3840(RGB) × 720 | OSD KEYS | 5 KEYS (POWER SWITCH, MENU, +, -, EXIT) |
| Pixel Arrangement | RGB Vertical Stripe | OSD CONTROL | BRIGHTNESS, COLOR, CONTRAST, AUTO ROTATION, H/V POSITION, ETC. |
| Display Area(A.A) | 1073.78(W)×201.334(H) mm | ||
| Overall Dimension | 1112.3(W)×228.5(H) mm | ||
| Panel Weight | 4.50±0.3 Kgs | ||
| Surface Treatment | Haze 1%, Hard coating (3H) | ||
| LCD Technology | Super MVA, Normally Black, Transmissive | ||
| Panel Type | a‑Si TFT‑LCD, LCM | ||
| Typical Brightness | 1000 nits | ||
| Contrast Ratio | 5000:1 (Typ.) (TM) | ||
| Response Time | 12 ms (Typ.) G to G | ||
| Viewing Angle | 89°/89°/89°/89°(Typ.)(CR≥10) | ||
| Viewing Direction | Full Viewing Angle | ||
| Display Colors | 1.07B Colors, 98% sRGB | ||
| Refresh Rate | 60Hz | ||
| Backlight Type | WLED, 50K hours, with LED driver | ||
| Power Consumption | ‑ | ||
| Signal Interface | V‑by‑One 8 lanes, 51 pins, 0.5mm connector | ||
| Supply Voltage | 12V (Typ.) | ||
| Touch Panel | Without Touch Function | ||
| Application Fields | Digital Signage, Bar‑type Display | ||
| Operating Temperature | -20 ~ 60 °C | ||
| Storage Temperature | -20 ~ 60 °C | ||
Custom-Cut Bar LCD Solutions for OEM & ODM Projects
Your size. Your interface. Your project. We turn standard LCD cells into the exact bar display your product needs, with no new panel fab line, no six-figure tooling and no compromise on your industrial design.
Request a Feasibility Check · WhatsApp / WeChat: +86 18173373517
Why Standard Sizes Don't Fit Modern Products
Bar-type and stretched displays are showing up everywhere: on shelf edges, in vehicles and elevators, on machines, in smart-home devices and on fitness equipment. But the panel you need rarely exists off the shelf.
Your enclosure has a fixed width, and the nearest standard panel is 20–50 mm too long
A new custom panel from a fab means high NRE and 6–12 months of development
Volumes are too small (hundreds to a few thousand pieces a year) for a panel maker to consider
You need a specific interface, brightness or bracket that catalog products don't offer
Our custom cutting service closes this gap. We take high-quality standard TFT cells and re-shape them to your outline, then complete the module with backlight, driver board and mechanics.
What We Can Deliver
| You Need | We Provide |
|---|---|
| A non-standard length or width | Custom-cut stretched bar LCD, from short strips to 43"+ ultra-wide formats |
| Extreme aspect ratios (e.g. 8:1, 16:3, 32:9 and beyond) | Layout-checked against the panel's driver area and pixel structure |
| A complete display, not just glass | LCM with backlight, LED driver, control board and cable |
| Direct connection to your system | HDMI, VGA, V-by-One, LVDS, eDP, MIPI or custom interface |
| Sunlight-readable performance | High-brightness backlights, 1000 nits and above |
| Touch or a cover glass | Capacitive touch, optical bonding, AR / AG / anti-fingerprint |
| A unique mechanical fit | Custom frames, brackets, connector positions and cable length |
Reference project: 43" bar display, 3840 × 720, 1000 nits, HDMI/VGA control board.View the HT430HBM product page
Any Size, Engineered to Feasibility
We can cut to virtually any bar dimension your design calls for, within the physical limits of the source panel: driver circuit location, seal line and pixel structure. Our engineers tell you at the start what is possible, and suggest the best source panel if your first choice isn't.
How the size is decided
You send the target outline and tolerance
We select the source panel with the best fit (resolution, pitch, interface, brightness)
We map your cut line against the Gate/Source fan-out and TFT array area
You receive a feasibility report and marked drawing in 3–5 working days
If your size can't be reached safely, we say so early and offer the closest alternative, so you don't lose weeks on a design that won't work.
Our Custom Cutting Process
Step 1: Feasibility & Design-In
Drawing review, source panel selection, cut-line safety check and interface planning.
Step 2: Precision Cutting
Mechanical scribe-wheel cutting for straight cuts and cost-effective volume
Ultra-fast laser cutting for tight tolerance, low chipping and complex profiles
Typical tolerance: ±0.05 to ±0.2 mm depending on method.
Step 3: Edge Treatment & Sealing
Edge inspection under microscope
UV-cure and moisture-barrier re-sealing of the exposed cell edge
Optional light-blocking edge masking to avoid light leakage and edge Mura
Step 4: Module Assembly
Backlight, LED driver, polarizers, FPC/driver connection, control board and mechanics.
Step 5: Testing & Reliability
100% functional and optical inspection, plus reliability testing per your specification: high/low temperature, temperature-humidity, thermal shock, vibration and drop.
Built for Reliability
Cutting a cell should never mean cutting quality. Our process is designed around the failure modes engineers worry about:
| Concern | How We Address It |
|---|---|
| Liquid leakage / moisture | Controlled dispensing of UV-curable and barrier sealants, fully cured and inspected |
| Micro-cracks at the edge | Process-matched cutting, edge inspection and optional chamfer |
| Light leakage / color shift | Edge masking and dark-room Mura checks at multiple gray levels |
| Long-term stability | Environmental testing plan agreed with you before sampling |
| Batch consistency | Serial traceability and fixed process parameters per project |
A test report is supplied with every custom project.
Target Markets & Applications
Retail & Shelf-Edge: electronic shelf strips, price and promotion bars
Transportation: passenger information, in-vehicle and platform strips
Elevators & Buildings: floor indicators, wayfinding, lobby information
Industrial & HMI: machine panels, control consoles, instrument clusters
Vending, Kiosk & POS: fascia displays, customer-facing bars
Fitness & Consumer Equipment: treadmill, cycling and smart-appliance displays
Stage, Gaming & Hospitality: ultra-wide creative and signage displays
Engagement Models
| Model | Best For | What's Included |
|---|---|---|
| Standard Module | Fast start, low risk | Existing bar panels such as the 43" 3840 × 720 model |
| Custom Cut (OEM) | Fixed enclosure, new size | Your dimensions, our proven source panel and process |
| Full ODM | Complete display subsystem | Optics, mechanics, board, firmware, OSD and packaging |
Project Roadmap
| Phase | Typical Timing* |
|---|---|
| Inquiry → feasibility report | 3–5 working days |
| Drawing approval → first samples (20 pcs) | 3–5 weeks |
| Sample validation & sign-off | Customer-dependent |
| Mass production | 6–8 weeks after sign-off |
Typical reference; confirmed in your formal quotation.
Commercial terms
NRE: quoted per project, reduced or credited against volume orders
MOQ: samples from 20 pcs, production from around 100 pcs
Production yield target: 95%+ after process stabilization
Warranty: 12 months, extended terms on request
Why Work With Us
Engineering-first: you speak with people who read your drawings, not just quote them
Low barrier to start: small samples, transparent NRE, no fab-level minimums
One partner, whole display: cell, backlight, board, cable, bracket and firmware
Flexible interface support: from HDMI/VGA plug-and-play to V-by-One and LVDS
Export-ready: RoHS and REACH-compliant materials, English documentation, worldwide shipping (EXW, FOB, CIF, DDP)
Start Your Custom Bar Display Project
Send us:
Target outline size and tolerance (drawing in DXF / DWG / STEP / PDF)
Interface and brightness requirement
Operating temperature and environment
Annual volume and target price
Touch, cover glass or bonding needs
We reply with a feasibility check and quotation.
📧 Email: chenhua@hitulcd.com
🌐 Website: www.hitulcd.com
💬 WhatsApp / WeChat: +86 18173373517
FAQ
Can you really make any size?We can cut to almost any dimension your design needs, limited only by the source panel's driver area, seal line and pixel layout. We confirm this in the feasibility check before you commit.
Do I need to pay for a new panel design?No. We build on existing high-quality TFT cells, so the cost is a fraction of a full custom panel program.
Will the cut edge leak or fail in humidity?Every cut edge is sealed with UV-curable and moisture-barrier materials, and reliability testing is included in the project plan.
Can you supply a full kit for my system?Yes. We provide the module with backlight driver and control board, or a plug-and-play HDMI/VGA kit with OSD.
What if my size isn't possible?We tell you early and suggest the nearest feasible size or a better source panel.
Specifications and timelines are typical values and are confirmed in the project quotation and approval drawing.
43" Custom Stretched Bar LCD Panel (3840×720) — Model HT430HBM
High-brightness 1000 nits ultra-wide bar display for OEM / ODM equipment, digital signage and embedded projects. Available as a bare LCM or as a complete HDMI/VGA driver-board kit.
Product Overview
The HT430HBM is a 43.0" a-Si TFT-LCD module in an ultra-wide 16:3 stretched bar format. Its 3840 × 720 resolution and 1073.78 × 201.334 mm active area suit shelf-edge displays, transit information strips, dashboards, vending and kiosk fascias, retail signage and industrial control panels.
With 1000 nits typical brightness, 5000:1 contrast and a Super MVA panel offering 89° viewing angles in all four directions, it stays readable in bright environments and from off-axis positions. It is offered as a standard module, a complete kit with control board, or a project-specific custom size cut and re-sealed from a standard panel.
Key Benefits
Ultra-wide 16:3 bar format: 3840 × 720 pixels, about 90.8 PPI (0.280 mm pixel pitch)
High brightness: 1000 nits typical, WLED backlight rated 50K hours
Wide viewing angle: Super MVA, 89°/89°/89°/89° (CR ≥ 10)
Wide temperature range: operating −20 to 60 °C
Fast integration: HDMI/VGA control board, 5-key OSD, single DC 12 V input
Hard-coated surface: 3H hardness, 1% haze
OEM/ODM friendly: custom sizes, connectors, brackets, firmware and OSD defaults
Technical Specifications
LCD Panel
| Item | Specification |
|---|---|
| Model Number | HT430HBM |
| Diagonal Size | 43.0" |
| Resolution | 3840 (RGB) × 720 |
| Aspect Ratio | 16:3 (5.33:1) |
| Pixel Arrangement | RGB Vertical Stripe |
| Active Area (A.A) | 1073.78 (W) × 201.334 (H) mm |
| Module Outline Dimension | 1112.3 (W) × 228.5 (H) mm |
| Panel Weight | 4.50 ± 0.3 kg |
| LCD Technology | Super MVA, Normally Black, Transmissive |
| Panel Type | a-Si TFT-LCD, LCM |
| Typical Brightness | 1000 cd/m² (nits) |
| Contrast Ratio | 5000:1 (Typ.) |
| Response Time | 12 ms (Typ.), G to G |
| Viewing Angle (L/R/U/D) | 89° / 89° / 89° / 89° (Typ., CR ≥ 10) |
| Display Colors | 1.07 B (10-bit), 98% sRGB |
| Refresh Rate | 60 Hz |
| Surface Treatment | Haze 1%, Hard Coating (3H) |
| Backlight | WLED, 50,000 hours (typ.), with LED driver |
| Signal Interface | V-by-One, 8 lanes, 51-pin, 0.5 mm pitch connector |
| Supply Voltage | 12 V (Typ.) |
| Touch Panel | Without touch (touch integration available on request) |
| Operating Temperature | −20 to 60 °C |
| Storage Temperature | −20 to 60 °C |
| Operating Humidity* | 10–90% RH, non-condensing |
| Typical Applications | Digital signage, bar-type displays, embedded HMI |
HDMI / Control Board
| Item | Specification |
|---|---|
| Input Interface | HDMI, VGA |
| Power Input | DC 12 V, 5 A (60 W max. adapter rating) |
| OSD Keys | 5 keys: Power, Menu, +, −, Exit |
| OSD Functions | Brightness, Color, Contrast, Auto Rotation, H/V Position, etc. |
| Output to Panel | V-by-One, 8 lanes |
* Standard industry value. Full electrical, optical and mechanical details are in the datasheet and drawing (available on request).
Custom Cutting & Re-Sealing Service (OEM / ODM)
Need a size that does not exist as a standard panel? We can develop a custom-length or custom-width version from a standard open cell, with no need to fund a new panel fab line. Below are the answers to the questions engineers and project managers ask most often.
1. Process Feasibility
Cutting method
| Method | Typical Use | Typical Tolerance* |
|---|---|---|
| Mechanical scribe-wheel cutting | Straight cuts, cost-effective volume | ±0.1 to ±0.2 mm |
| Ultra-fast (picosecond) laser cutting | Tight tolerance, small chipping, corner or notch profiles | ±0.05 to ±0.1 mm |
The method is chosen from your drawing, dimensional tolerance, edge quality and volume.
Wiring and TFT array avoidance
Cutting is only possible outside the driver-circuit area. Our engineers check the cut line against the panel's Gate/Source fan-out, shorting bars, seal line and TFT array region before we quote. To assess your project, please provide:
Target outline dimensions and tolerance (2D drawing in DXF/DWG/STEP or PDF)
Mounting, bezel and mechanical constraints
Required orientation of the FPC/driver side
Target quantity, application and environment
Preferred interface (V-by-One, LVDS, eDP, HDMI board)
We return a feasibility report within 3–5 working days, marking the safe cut zone on the panel drawing.
Edge quality
Glass edge chipping and roughness are inspected under a microscope at defined sampling rates
Typical target: chipping ≤ 0.1 mm, no micro-cracks reaching the active area
Optional edge chamfer or polish for handling safety
Edge strength is verified by sampling at drop and bend checks
2. Reliability & Edge Sealing
Sealing process
After cutting, the exposed liquid-crystal cell edge is re-sealed using a UV-curable sealant and/or moisture-barrier adhesive, applied by controlled dispensing and fully cured. The seal prevents:
Liquid-crystal leakage
Moisture ingress and bubble formation
Edge contamination that causes long-term Mura
Optional: black edge masking or light-blocking tape and a protective frame for outdoor or vibration-prone use.
Reliability testing (typical project plan)
| Test | Typical Condition* |
|---|---|
| High-temperature operation | 60 °C, 240–500 h |
| Low-temperature operation | −20 °C, 240–500 h |
| High temp/humidity | 60 °C / 90% RH, 240–500 h |
| High-temp/humidity (85/85) | 85 °C / 85% RH, 240 h (project-specific, on request) |
| Thermal shock | −20 °C ↔ 60 °C, 100 cycles |
| Vibration | Random, per IEC 60068-2-64 |
| Drop / shock | Packaged drop per ISTA 2A or ASTM D4169 |
Conditions are typical for industrial-grade displays and are finalized with you at the specification stage. A test report is provided for every custom project. The standard panel is rated −20 to 60 °C; any test beyond that range is evaluated per project.
Optical performance at the cut edge
The seal and edge masking are designed to prevent light leakage at the cut side
Color shift and edge Mura are checked in a dark room at 0 %, 25 %, 50 % and full gray patterns
Pass criteria are agreed in the specification before sampling
3. Cost, Yield & Lead Time
| Item | Typical Reference* |
|---|---|
| NRE / engineering fee | Quoted per project (fixture, program, tooling); credited or reduced against volume orders |
| Feasibility report | 3–5 working days |
| First samples (20 pcs) | Approx. 3–5 weeks after drawing approval |
| Mass-production lead time | Approx. 6–8 weeks after sample sign-off |
| Expected production yield | Target ≥ 95% after process stabilization |
| MOQ | Custom cut: from 100 pcs (samples from 20 pcs); standard modules: lower MOQ available |
Final NRE, yield and MOQ depend on size, tolerance, quantity and interface, and are stated in a formal quotation.
Customization Options
Custom cut length or width, or full custom outline
Interface: V-by-One, LVDS, eDP, HDMI, VGA, USB-C (per project)
Optical bonding, AR/AG glass, anti-fingerprint coating
Projected capacitive or IR touch integration
Brightness options and dimming (PWM/DC)
Custom OSD defaults, boot logo and firmware
Rear bracket, metal frame, cable length and connector
Custom packaging and labels
Typical Applications
Digital signage and retail shelf-edge displays
Transportation information and passenger information systems
Bar-type dashboards and instrument clusters
Elevator, vending and kiosk displays
Industrial HMI and control panels
Stage, gaming and hospitality displays
Quality & Compliance
Incoming, in-process and outgoing inspection with 100% functional test
Serial number traceability per batch
RoHS and REACH compliant materials
Control board and adapter: CE / FCC certification on request
Standard warranty: 12 months (extended terms available on request)
Packaging & Shipping
Anti-static bag, foam protection and export carton
Palletized for volume orders
Incoterms: EXW, FOB, CIF, DDP on request
Ships from China; sample shipping by DHL / FedEx / UPS
Request a Quote or Sample
Send us your drawing, target quantity and interface requirements. Our engineers will reply with a feasibility check and quotation.
Email: chenhua@hitulcd.com
Website: www.hitulcd.com
WhatsApp / WeChat: +86 18173373517
Please include: target size and tolerance, interface, brightness, operating temperature, annual volume, and target price.
Specifications are typical values and may change with panel improvements. Please request the latest datasheet and approval drawing before design-in.
Know The Terms Before You Inquire.
|
01 — Shipping Terms
Incoterms Available
EXW
Ex Works — pick up from our factory
FOB
Free On Board — most common for ocean freight
CIF
Cost, Insurance & Freight — to your port
|
02 — Order Minimum
MOQ: 1 Units
Applies to standard specs. Custom brightness, cutting or bezel may adjust MOQ, confirmed at quotation. Sample units available before bulk order
|
03 — Payment Protection
Multiple Secured Methods
|
A Real Factory. Publicly Verifiable.
|
Legal Company Name
Shenzhen Hantu Jiashi Technology Co., Ltd.
|
Unified Social Credit Code
91440300306068446B
|
|
Legal Representative
YUN CHEN
|
Registered Capital
RMB 2,000,000
|
|
Established
May 23, 2014 (11+ years operation)
|
Business Status
● Active / In Operation
|
|
Registered Factory Address
Building B, Gangshen Innovation Park, Huaning Road, Dalang Sub-district, Longhua District, Shenzhen, Guangdong, China
|
|
Contact HITULCD
We'll respond via email within 24 hours. If you'd like to discuss details over WhatsApp or a call, please leave a preferred time and contact method in your message — we will never call you unannounced.
Related solutions
This product is suitable for the following industry application scenarios
Floor Information Bar LCD Display Solution
Ultra-wide, high-brightness stretched bar LCD disp...
view
Convenience Store Bar LCD Display Solution
Ultra-slim, high-brightness stretched bar LCD disp...
view
Bus Passenger Information Stretched Bar Display Solution
A rugged, ultra-wide stretched bar display solutio...
viewRelated Products
You may also be interested in the following products
500 Nits
42.5 Inch Custom Bar LCD Display for Industrial and Retail Equipment
1000 Nits
42.7 Inch Ultra-Wide Stretched LCD Module for Embedded Display Systems
1000 Nits
43 Inch Custom Stretched LCD Panel for OEM and ODM Equipment Projects
