48.5" Stretched Bar LCD Display — HT485HBM

16:3 Ultra-Wide IPS Bar Display · 1000 nits · 1920×360 (3840×720 optional) · HDMI / VGA / LVDS · OEM/ODM Ready

A 1.2-meter-wide, 20 mm-thin ultra-wide display, ready to integrate. Ships as a bare LVDS panel or as a complete HDMI/VGA display kit, with custom cutting, brightness, interface and bezel options on request.

Request a Quote · Request Samples · Chat on WhatsApp

Overview

The HT485HBM is a 48.5-inch stretched bar LCD, a standard 55" IPS panel precision-cut to a 16:3 ultra-wide format. It fits places a conventional 16:9 display cannot: shelf-edge and aisle signage, transit information strips, control-room status bars, vehicle and kiosk cut-outs, and wide industrial HMI dashboards.

The display runs at 1000 nits typical, so content stays readable in bright showrooms, glass-fronted windows and transit interiors. IPS technology gives 89°/89°/89°/89° viewing angles, so the image holds up for people viewing from the side or at a steep angle. The whole module is only 20 mm deep (1239.6 × 256.8 mm outline), which suits slim enclosures and tight mounting depths.

You can order it as a bare LVDS LCM for integration with your own controller, or as a ready-to-run display kit with an HDMI/VGA control board, 5-key OSD and a 12 V power input.

Key Features

• 16:3 ultra-wide format. A 1209.6 × 226.8 mm active area with a 1920×360 native resolution. A 3840×720 high-resolution version is available for sharper text and fine graphics.

• High brightness, 1000 nits typ. Built for ambient-light-heavy and window-adjacent installations. A 500-nit lower-power option is available.

• IPS, normally black, transmissive. Wide viewing angles, stable color from off-axis positions and deep blacks.

• WLED backlight. Uniform illumination with dimming control through the OSD, or through your own LVDS/PWM design.

• 16.7M colors (8-bit), 1.07B colors (10-bit capable). Smooth gradients for video, maps and data visualization.

• Industrial-grade design. Suited to long-duty and 24/7 operation when integrated with correct thermal management.

• Slim 20 mm profile. Easy to fit in tight enclosures, wall recesses, vehicle panels and kiosks.

• Integration-friendly control board. HDMI + VGA inputs, 12 V DC supply, and OSD controls for brightness, color, contrast, auto rotation and H/V position.

• Customizable. Cut size, brightness, interface, bezel, cover glass and touch can be adapted to your project.

Typical Applications

Technical Specifications

LCD Panel

HDMI / Control Board (Display Kit Version)

Environmental

Typical values are shown at 25 °C. Contrast, response time, refresh rate, power consumption, weight, surface treatment and humidity ratings are reference values based on standard industry figures for this panel class. The formal datasheet and sample measurements are provided on request, and customized versions may differ.

Choose Your Configuration

Resolution options: 1920×360 (standard) or 3840×720 (high resolution).Brightness options: 500 nits or 1000 nits.

Custom Cutting, Sealing & Reliability: Engineering FAQ

Stretched bar displays are made by cutting standard panels. We know engineers and purchasing teams want to understand that process before approving it. These are the questions we hear most, answered directly.

1. Cutting Method, Tolerance and Feasibility

Which cutting method do you use?We select the method per project. Mechanical wheel cutting is the proven choice for standard cuts and for volume. Ultra-fast laser cutting can be used where a tighter edge quality, a non-standard contour or a narrow border is required. The recommended method is confirmed during the engineering review.

What tolerances can I expect?Typical cut-dimension tolerance is ±0.2 mm for standard cuts; tighter values can be reviewed per project. Module outline and mounting tolerances are specified on the drawing you approve before production.

Will the cut interfere with Gate/Source routing or the TFT array?This is checked before any cut is made. Each custom size goes through a feasibility review against the panel's cell design to confirm that the cut line stays clear of the Gate/Source fan-out and the active TFT array, and that driver IC and FPC bonding areas remain available.

What do you need from us for the feasibility review?

• Target outline and active-area dimensions with tolerances

• Mechanical drawing or 3D model (STEP/DXF), if available

• Required resolution, brightness and interface

• Mounting method, bezel or cover-glass details

• Operating environment and expected volume

What edge quality is achieved?Edges are inspected for chipping, cracks and flatness after cutting, and ground and finished as required. Microcrack control is verified in incoming and final inspection, with edge inspection records available on request.

2. Edge Sealing and Reliability

How is the cut edge sealed?After cutting, the exposed cell edge is protected with a secondary sealing process, normally a UV-cure sealant applied by controlled dispensing, to block moisture ingress and prevent liquid-crystal leakage or edge degradation. Alternative sealant materials can be discussed for harsher environments.

Which reliability tests apply?We use the following reference plan for cut modules, and can adapt it to your specification:

Test reports for comparable cut projects can be shared under NDA. Tell us the target environment, whether consumer, industrial or transport, and we will propose a matching test plan.

Is light leakage or Mura a risk at the cut edge?This is a known risk with any cut panel, and we manage it through (1) the cut-line design review, (2) edge sealing and light-shielding tape or bezel design, and (3) 100% optical inspection of the finished module for edge light leakage, color shift and Mura.

3. Cost, Samples, Yield and MOQ

Is there an NRE fee?

• Standard HT485HBM (48.5", 1/3 cut): no NRE. Order directly.

• New or modified cut sizes: a one-time engineering charge may apply for tooling, fixtures and validation. It depends on the project, is stated in the quotation, and is often credited against volume orders.

How long do samples take?

• Standard version: 2–3 weeks.

• Custom first samples (e.g., 20 pcs): 4–6 weeks from drawing approval.

What yield can I expect in volume?Yield depends on cut geometry and edge requirements. We set a target yield during the feasibility stage and agree an acceptance standard (AQL) in the quotation, so there is a clear basis for costing.

What is the MOQ?

• Standard specification: 1 unit.

• Custom cut, brightness or bezel: MOQ confirmed at quotation.

• Samples: available before bulk orders.

Quality, Certification & Compliance

Commercial Terms

Why Buy from HITULCD

• Manufacturer-direct. You work with the factory and its engineers, with no trading-company layer between you and the people who make your display.

• Custom engineering. Size, brightness, interface, touch and mechanical integration, from prototype to repeat production.

• OEM/ODM support. Private labeling, custom firmware/OSD and tailored packaging.

• Verifiable company. Shenzhen Hantu Jiashi Technology Co., Ltd., established 2014 and registered in Shenzhen, China (Unified Social Credit Code 91440300306068446B). Public registry records are available for your supplier due diligence.

Related Products

• 49.5" 3840×1080 Ultra-Wide LCD Display

• 50.8" 3840×1440 Ultra-Wide LCD Display

• Industrial High Brightness Display Kits (1000–3000 nits)

• Open Frame Monitors

Get a Quote in 24 Hours

Send us your target size, resolution, brightness, interface, quantity and application, and our engineers will reply with feasibility feedback and pricing within 24 hours.

Shenzhen Hantu Jiashi Technology Co., Ltd.Building B, Gangshen Innovation Park, Huaning Road, Dalang Sub-district, Longhua District, Shenzhen, Guangdong, China